flashlubeflashlube

uk

Heavy Duty Oil Stabiliser



Heavy Duty Oil Stabiliser




About
Test Results
F.A.Q.
M.S.D.S.
REACH

About

Flashlube Heavy Duty Oil Stabiliser is a high performance, anti-wear oil formulation containing a powerful blend of additives that provide superior protection against engine wear in old & new engines. This latest formulation puts Flashlube at the forefront of the oil additives market, minimising oil breakdown & engine wear. It also improves oil lubricity and is compatible with all engine oils.

Flashlube Heavy Duty Oil Stabiliser is a 100% petroleum product formulated to compensate for wear in older engines, gearboxes, differentials and to reduce the wear process in new ones.

Flashlube Heavy Duty Oil Stabiliser also contains a powerful blend of additives that allows motor & gear oils to maintain a higher degree of lubricity. It eliminates high temperature viscosity breakdown, even under the most extreme conditions, allowing the oil to last up to 30% longer. Oil treated with Flashlube Heavy Duty Oil Stabiliser does not run off cylinder walls after shut down, eliminating dry starts, the number one cause of wear in an otherwise well maintained engine.

Ordinary motor oil is formulated with the tolerance of new engines in mind. Once an engine becomes worn the wearing process advances at a rapid rate because motor oil alone cannot adequately lubricate the moving parts. This is particularly true in the use of synthetics.

oilstab_s

 Application:
Flashlube Heavy Duty Oil Stabiliser is formulated for both new and old engines. While a small amount (up to 25%) can maintain a new engine, larger amounts (up to 50%) can be added to a worn engine to properly seal and cushion the moving parts, to slow oil consumption and prevent further wear.

Recommended for use in all new & used cars, trucks, motor bikes, boats, agricultural and industrial equipment, in engines gearboxes & differentials.

Directions:
1. Add Flashlube Heavy Duty Oil Stabiliser to engine oil.
New Petrol & Diesel engines - Add 20%-25% (up to 1ltr to 4ltrs of oil)
Worn Petrol & Diesel engines - Add 25%-30% (up to 1ltr to 3ltrs of oil)

2. Add 1 Litre of Oil Stabiliser to 5 Litres of engine oil.

3. Add Flashlube Heavy Duty Oil Stabiliser directly to the engine with engine oil when engine is at normal operating temperature, or when changing your oil.

4. Start & run engine for 10 minutes to allow Flashlube Oil Stabiliser to blend completely with engine oil.

Use Flashlube Heavy Duty Oil Stabiliser with every oil / filter change.

 

Features:

  • Blends with all automotive lubricants, synthetics, mineral oil and ATF
  • Australian Made & Owned A
  • vailable in various pack sizes, from 500ml to 20 Litre

 

 

Available From:

From Leading Automotive spare parts stores
All good Service Stations Australia Wide
> where to buy

Benefits:

  • Reduces oil leaks, noise & blowby
  • Reduces oil consumption
  • Increases oil pressure & engine compression
  • Reduces smoke & exhaust emissions
  • Lowers engine temperature
  • Improves fuel economy
  • Extends oil life (up to 30%)
  • Reduces metal to metal contact that causes serious wear
  • Stops dry starts & reduces friction
  • Extends engine life
  • Provides superior engine protection

 

 

Test Results

 

The following graphs will help you to understand the differences between oil stabiliser brands, the role that the additives play in each product, and help you recommend to customers the best product for their vehicle.

Each product had been tested by reputable laboratory chemists, then the results used to produce the new Flashlube Heavy Duty Oil Stabiliser to be the best Oil Stabiliser on the market in its category.

This new formulation will be suitable in any engine/oil with a problem (smoking, oi l consumption, or low oil pressure) or where the ambient temperatures are very high. There will also be longer drain benefit, extending the current drain interval due to the increasing in additive levels.

 

Viscosity
Viscosity modifiers, or viscosity index improvers as they were formally known, thicken the oil in a temperature selective manner.
The thickening is more pronounced at high temperature and less evident at low temperatures. This extends the temperature range, and life, over which a lubricant can be used.
It is important that the additive is not too thick, as it can cause oil pump problems. High viscosities additives can also have problems blending with oil.

 

 

 

Calcium
Calcium is used as a detergent. The purpose of detergents is to provide cleaning action, typically through the dispersing of particulate matter rather than cleaning up existing dirt and debris.
An important role of detergents is to minimise high temperature engine varnish and lacquer deposits by neutralising acids, which arise from fuel consumption by-products.

 

 

 

Zinc & Phosphorous
Zinc and Phosphorous are antiwear additives. Wear is the loss of metal with subsequent change in clearance between surfaces moving relative to each other. One of the principle causes is metal-to-metal contact. Metal to
metal contact can be prevented by adding film-forming compounds that protect the surface by chemical reaction or physical absorption. These Zinc dithiophosphates are widely used for this purpose.

 

F.A.Q.

1. What is Flashlube Oil Stabiliser?

Flashlube Heavy Duty Oil Stabiliser is a high performance, anti-wear oil formulation containing a powerful blend of additives that provide superior protection against engine wear in old & new engines. This latest formulation puts Flashlube at the forefront of the oil additives market, minimising oil breakdown & engine wear. It also improves oil lubricity and is compatible with all engine oils.

Flashlube Heavy Duty Oil Stabiliser is a 100% petroleum product formulated to compensate for wear in older engines, gearboxes, differentials and to reduce the wear process in new ones.

Flashlube Heavy Duty Oil Stabiliser also contains a powerful blend of additives that allows motor & gear oils to maintain a higher degree of lubricity. It eliminates high temperature viscosity breakdown, even under the most extreme conditions, allowing the oil to last up to 30% longer. Oil treated with Flashlube Heavy Duty Oil Stabiliser does not run off cylinder walls after shut down, eliminating dry starts, the number one cause of wear in an otherwise well maintained engine.

Ordinary motor oil is formulated with the tolerance of new engines in mind. Once an engine becomes worn the wearing process advances at a rapid rate because motor oil alone cannot adequately lubricate the moving parts. This is particularly true in the use of synthetics.

 

2. Why should I use Flashlube Oil Stabiliser?

Flashlube Heavy Duty Oil Stabiliser is a high performance, anti-wear oil additive, developed to meet the ever-increasing demands of todays engines. Flashlube Heavy Duty Oil Stabiliser is a 100% petroleum product formulated to compensate for wear in older engines, gearboxes, differentials and to reduce the wear process in new ones.

Flashlube Heavy Duty Oil Stabiliser also contains a powerful blend of additives that allows motor & gear oils to maintain a higher degree of lubricity. It eliminates high temperature viscosity breakdown, even under the most extreme conditions, allowing the oil to last up to 50% longer. Oil treated with Flashlube Heavy Duty Oil Stabiliser does not run off cylinder walls after shut down, eliminating dry starts, the number one cause of wear in an otherwise well maintained engine.

Ordinary motor oil is formulated with the tolerance of new engines in mind. Once an engine becomes worn the wearing process advances at a rapid rate because motor oil alone cannot adequately lubricate the moving parts. This is particularly true in the use of synthetics.

Flashlube Heavy Duty Oil Stabiliser is formulated for both new and old engines. While a small amount (up to 25%) can maintain a new engine, larger amounts (up to 50%) can be added to a worn engine to properly seal and cushion the moving parts, to slow oil consumption and prevent further wear.

Recommended for use in all new & used cars, trucks, motor bikes, boats, agricultural and industrial equipment, in engines gearboxes & differentials.


3. How does Flashlube Oil Stabiliser compare to its competitors?

Excellent.
Flashlube Oil Stabiliser is seen as the leading product on the market.

flashlube products

icon-news

how flash lube works

flashlube